Statik Route 1.2

Kadıköy router’ı
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int s 1/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial1/0, changed state to down
Router(config-if)#clock rate 56000
Router(config-if)#exi
Router(config)#int fa 0/0
Router(config-if)#ip address 192.168.4.1
% Incomplete command.
Router(config-if)#ip address 192.168.4.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exi
Router(config)#int s 1/1
Router(config-if)#ip add
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no sh

%LINK-5-CHANGED: Interface Serial1/1, changed state to down
Router(config-if)#exi
Router(config)#int s 1/1
Router(config-if)#clock rate 56000
Router(config-if)#exi
Router(config)#^Z
%SYS-5-CONFIG_I: Configured from console by console
Router#wri mem
Building configuration…
[OK]
Router#en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.5.0 255.255.255.0 192.168.1.2
Router(config)#ip route 192.168.6.0 255.255.255.0 192.168.2.2
Router(config)#^Z
%SYS-5-CONFIG_I: Configured from console by console
Router#wri mem
Building configuration…
[OK]

Tuzla Router’ı
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int s 1/1
Router(config-if)#ip address 192.168.3.2 255.255.255.0
Router(config-if)#no sh
Router(config)#exi

Router#conf t
Router(config)#int fa 0/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.5.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exi
Router(config)#int s 1/0
Router(config-if)#ip add
Router(config-if)#ip address 192.168.1.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#^Z
Router#
Router#wri mem
Building configuration…
[OK]
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.4.0 255.255.255.0 192.168.1.1
Router(config)#ip route 192.168.6.0 255.255.255.0 192.168.3.1
Router(config)#^Z
Router#wri mem
Building configuration…
[OK]

Eminönü router’ı
Router>en
Router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int s 1/0
Router(config-if)#ip address 192.168.2.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exi
Router(config)#int s 1/1
Router(config-if)#ip add
Router(config-if)#ip address 192.168.3.1 255.255.255.0
Router(config-if)#clock rate 56000
Router(config-if)#no sh
Router(config-if)#exi
Router(config)#int fa 0/0
Router(config-if)#ip ad
Router(config-if)#ip address 192.168.6.1
Router(config-if)#ip address 192.168.6.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#^Z
Router#wri mem
Building configuration…
[OK]
Router#configure terminal
Router(config)#ip route 192.168.5.0 255.255.255.0 192.168.3.2
Router(config)#ip route 192.168.4.0 255.255.255.0 192.168.2.1

Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1

Router(config)#^Z
Router#wri me
Building configuration…
[OK]

Bir Yanıt

  1. […] Statik Route 1.2 […]

Bir Cevap Yazın

Aşağıya bilgilerinizi girin veya oturum açmak için bir simgeye tıklayın:

WordPress.com Logosu

WordPress.com hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Twitter resmi

Twitter hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Facebook fotoğrafı

Facebook hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Google+ fotoğrafı

Google+ hesabınızı kullanarak yorum yapıyorsunuz. Log Out / Değiştir )

Connecting to %s